d2w series ? sip ssr ? ratings to 3.5a @ 280 vac ? dc control ? zero-crossing (resistive loads) output ? internal snubber network product selection control voltage 2a 3a 3.5a 3-32 vdc d2w202f d2w203f d2w203f-11 output specifications (1) description operating voltage (47-63hz) [vrms] 24-280 24-280 24-280 transient overvoltage [vpk] 600 600 600 maximum off-state leakage current @ rated voltage [marms] 8 8 8 minimum off-state dv/dt @ maximum rated voltage [v/sec] (3) 200 200 200 maximum load current [arms] 2 3 3.5 minimum load current [arms] 0.06 0.06 0.06 maximum surge current (16.6ms) [apk] 28 70 80 maximum on-state voltage drop @ rated current [vpk] 1.4 1.4 1.4 minimum power factor (with maximum load) 0.5 0.5 0.5 input specifications (1) description control voltage range 3-32 vdc must turn on voltage 3.0 vdc must turn off voltage 1.0 vdc typical input current @ 5 vdc 3.0 madc nominal input impedance 1500 ohm maximum turn-on time [msec] 1/2 cycle maximum turn-off time [msec] 1/2 cycle general specifications description parameters dielectric strength, inpu t/output/base (50/60hz)(2) 4000 vrms minimum insulation resistance (@ 500 vdc)(2) 10 9 ohm maximum capacitance, input/output 10 pf ambient operating temperature range -30 to 80c ambient storage temperature range -30 to 125c weight (typical) 0.6 oz. (17g) encapsulation thermally conductive epoxy general notes 1) all parameters at 25c unless otherwise specified. 2) dielectric and insulation resistance are measured between input and output 3) off-state dv/dt test method per eia/narm standard rs
mechanical specifications pin 1: ac load pin 2: ac load pin 3: +dc control pin 4: -dc control thermal derate information agency approvals ul e116950 csa lr81689 rev. 120110
annex - enviromental information
|